污水井模具.電力檢查井模具.一體式檢查井模具-檢查井鋼模具-使用與說明會說明模具的使用步驟，像模具是可以使用預制或者使用現場澆筑的方式來對混凝土預制件進行生產的，他們的區別在于一種是使用現場制作的方式，另外一種是把混凝土預制件制作出來之后，運輸到使用場地中進行擺放使用，不管是使用預制的方式，還是使用現場制作的方式，都需要避免模具損壞的狀況出現，以免模具的使用壽命受到一定的影響，一體式檢查井模具使用的時候，因為是由內膜以及外模共同組成的，所以在使用的時間，需要把模具的外模組裝好以后把模具的內膜也組裝好，把模具組裝好以后，需要把模具的外模放置到模具的外模中，在模具預留的注澆筑口中倒入需要的混凝土，把混凝土倒入模具中以后，使用震動棒把模具中的混凝土中出現的氣泡震動出來，然后把模具進行靜置，靜置一段時間之后，模具中的混凝土就凝固了，一體式檢查井模具不管是現場澆筑還是預制的方式，都會使用相同的制作方法來進行制作，使用到的時間都不會很多。
Square well mould Square inspection well mould Round well mould Concrete manhole mould Sewage well mould Electric inspection well mould The use and instructions of the integrated inspection well mold - inspection well steel mold - will explain the use steps of the mold. For example, the mold can be produced by prefabrication or on-site pouring. The difference between them is that one is made on site, and the other is after the concrete prefabrication is made, When transported to the use site for placement and use, whether it is prefabricated or made on site, it is necessary to avoid mold damage, so as to avoid a certain impact on the service life of the mold. When the integrated inspection well mold is used, it is composed of inner membrane and outer mold, so during the use time, After the outer mold of the mold is assembled, the inner membrane of the mold shall also be assembled. After the mold is assembled, the outer mold of the mold shall be placed in the outer mold of the mold, and the required concrete shall be poured into the reserved pouring opening of the mold. After the concrete is poured into the mold, the air bubbles in the concrete in the mold shall be vibrated out with a vibrating rod, and then the mold shall be placed still, After standing for a period of time, the concrete in the mold will solidify. The integrated manhole mold, whether cast in situ or prefabricated, will be made by the same manufacturing method, and the use time will not be much.